Your form message has been successfully sent.

You have entered the following data:

Quick Contact

Please correct your input in the following fields:
Error while sending the form. Please try again later.

Note: Fields marked with * are required

Contact details

Taff Howells

3A Field Dairy Farm  



DT11 9EE

Call us


Tel; 01202 382781

Mobill: 07906 003904



Shop opening times

From October 1st

Mon  9am - 4.30pm

Tue    9am- 4.30pm

Wed  9am - 4.30pm

Thur 9am - 4.30pm

Fri    9am - 4.30pm

Sat   By prior arrangement

Sun  By prior arrangement


At Nepenthe boats we custom fit out rowing boats/ tenders to a high specification. Care and attention to detail is taken during the whole fit out only quality materials are used. Mahogany gunwaling and seating with stainless steel fittings. Pop up and folding cleats are used to reduce snagging areas when not in use. Bouancy bags are used in the bow and stern to give floatation for safety. Up to a 4hp outboard motor can be used. Due to the 5ft 1 inch beam and high freeboard this boat is very stable in the water. 9o kg unlaiden weight will not require braked trailer.



O/A Length 10ft 2 inch Beam 5ft 1 inch.  Mahogany Gunwales,  Mahogany Decking on seating areas, Mahogany thwarts,Stainless Steel Fittings, Brass Keel strip, White with Oxford blue top stripe, S/S rowlocks,S/S Side cleats,S/SPop up bow cleat. Bow and stern bouancy,Teak bilge keel grabrails 9mm reinforced transome for the use of outbord up to 4hp


Hull in the process of laying up. White hull with oxford blue top plank


Transom view 


Bow view showing she carries her wide beam forward to a sharp stem allowing her to cut though the water


Planning the fitting out of thwartsand gunwaling


Transom view showing wine glass stern



Bow bulkhead bonded in



Transom bulhead bonded in



Bow section showing Decking



Stern seat showing Decking



Nearing the final stages of fitting access hatches and varnishing



Deck Boards shaped and fitted



First coat of varnish applied



Varnished fore deck