All our Teak Gratings are made from solid slow grown Teak. We never use plantation Teak as this wont have the durability required. 12.7mm hole is normaly used in the Heads area as this is softer under foot, The 22mm hole is more in keeping with the Cockpit area.Each Grating is constructed with either the single or double castle layout and is set into a rebate on the outerframe for extra strength. SP epoxy resin glue is always used on all mating surfaces as this glue stands up to the test of time.
22 mm Hole Grating Spec; Outer Frame min 45 mm wide (inc rebate) 22 mm thick. Castle section 22 mm wide 18 mm thick. Flat section 22 mm wide 9 mm thick.
12.7 mm Hole Grating Spec; Outer Frame min 45 mm wide (inc rebate) 22 mm thick. Castle section 12.7 mm 18mm thick. Flat section 12.7 mm wide 8 mm thick
Single Castle
Flat section on top face
Double Castle
Castle section both top and bottom
Teak Shower Gratings with 12.7mm hole. Made to measure
From £41.00 per sq ft Minimum order 3 sq ft
Teak Cockpit Grating in 22mm Hole Made to Measure
From £39.00 per sq ft minimum order 3 sq ft
Gratings fitted to a Coastal Whammel
Household Shower Grating
For a no obligation quotation ploease email or send your sizes and shapes
Teak Grating Reforbishment. New Castles replaced to frame that was in good condition
Teak Grating Finnished looking as new
If its made from solid Teak or hardwood before you scrap it see if it can be restored/refurbished.
Print